Eccentric overburden casing drilling systems

Eccentric is the most economical solutions because its ingenious reaming wing the bit is retrievable can be used at the next hole

SINODRILLS Eccentric overburden casing drilling systems


Eccentric is the most economical solutions because its ingenious reaming wing the bit is retrievable can be used at the next hole. This is particularly design for shallow holes, as is often the case in water well drilling, geothermal wells and for shallow micro-piling work. Odex is ideal for short holes in consolidated overburden. The component of Eccentric system consists of Pilot bits, Reamer bits, Guide device and casing shoe.


When drilling, the reamer bit will rotate out to enlarge the hole which enough for the casing tube slide down behind the reamer. When reached required depth, the drill pipe will drill to the reverse direction and the reamer bit will retract, it is allowing the whole drilling system to pass through the casing.


The below size of Eccentric systems which are available, and the special design is upon customer’s requirement:

Eccentric 90, Eccentric 114, Eccentric 140, Eccentric 165, Eccentric 190 and Eccentric 240

Submit Successed !

We will contact with you within 12 hours, thanks for your inquiry.

Submit Fail !

Please re submit.
Please fill the blanks to contact us. We will reply to you in 24 hours.
Country:
* Company:
* Full Name:
* Email:
Website:
* Message:
* Code Shown:
Load new image